Tuesday, December 16, 2014

CLEANING STUCCOS – WHAT YOU’LL NEED AND HOW YOU DO IT

It is true that stuccoes rarely require maintenance and repair. However, it does require cleaning from time to time, especially if left unpainted. The surface of stucco coating is characteristically porous, which easily absorbs dirt and dust. Also, algae and yeast infection causes stains on the surface tainting the very appearance of the house. A thorough, professional cleaning from companies offering a comprehensive stucco solution in Albuquerque NM can be hired for a complete and cared cleaning. However, if done properly and with the right methods, stucco cleaning can be done on your own with ease. Read on to find out how.


 
What you will need…
·         Cleaning products
Go for concentrated products manufactured especially for exteriors- walls, decks and gutters that pretty much do the same thing. Prefer non-toxic and bio-degradable ones.
·         Protective outfits
Invest in a pair of good rubber boots and gloves to protect your hands and feet. Use safety goggles for your eyes. Also, use a disposable dress to avoid getting the chemicals on your clothes.
·         Low pressure garden sprayer
A high pressure jet sprayer is used by the construction companies in Albuquerque NM for stucco cleaning. Refrain from using one because it requires a professional expertise to use it safely and effectively. A low pressure garden sprayer is easy to control, causes minimal waste and is not too harsh on the stucco coating.
·         Scrub Brush
Arrange a scrub brush with plastic fibers and for tougher stains use a metal wire brush.
How you do it..
To begin with, moisten the walls that need to be cleaned. Applying a consistent force of water. Go from bottom to top to avoid the underlying layer to absorb too much water. Prepare the garden sprayer. Mix the product well, using the directions for use provided on the label. Start spraying the mixture on the wall in an even stream from the bottom to top. Make sure you apply just the right pressure. Too much pressure on the stucco may cause damage. Be sure to cover the entire area and concentrate more on the stained areas. After the application is complete, use a scrub to brush out the dirt and algae. Wash out the wall. Reapply the mixture is the stains are not completely removed. The wall should then be left to dry.

In case of cracks that appear wider than a hairline, call up a professional for a cracked stucco solution in Albuquerque New Mexico.