Building Defects and Their Timely Solution

The materials used in construction of buildings like steel, concrete, wood, etc. are susceptible to corrosion mainly by water or humidity. However, there are other factors that also cause degradation of buildings over time. It would be wrong to assume buildings in almost desert-like climate as in parts of America like the state of New Mexico that receive minimal rainfall are free from defects or problems. The construction companies in Albuquerque, NM are challenged by multitude of setbacks in buildings that require immediate service and maintenance. Temperature fluctuation, faulty construction, micro-organisms, atmospheric pollution, exposure to hazardous chemical substances, etc. are perilous to building strength.

Faulty construction can cause defects in building which may result in disaster without timely correction. Erroneous design load, inaccurate fixing, wrong sealants, inappropriate architectural design, poorly skilled masonry, use of low grade materials, etc can all lead to building defects that can worsen with other climatic factor. Such defects should be scrutinized especially when buying a pre-owned house. When constructing a new building, designs and architecture should be given good attention and the materials used should be compatible with the climatic conditions. A reliable construction company should be hired to ascertain such defects for preventive measures.

The exteriors should be given special notice since it is one of the major areas that are prone to damage caused by corroding agents. The materials for exteriors should be suitable to the climatic conditions. A problematic exterior could stem out a host of other problems. Stuccoes broadly used in the dry regions could develop cracks and other defects due to its porous property. Also, use of wrong type of stuccoes can be rather costly and detrimental. There are companies providing complete stucco solution in Albuquerque, New Mexico and other areas where stuccoes are popularly used. Apt solutions should be brought into effect.

Also liable to easy wear are the parapets, roofs and window and door areas. Such areas should be regularly screened for cracks and other defects. Presence of micro-organisms, the quality of sealant used, incorrect cleaning methods involving acidic chemicals, high level of pollutants in the atmosphere can cause cracks, decay, discoloration and corrosion. Companies specializing in roofing and parapet Repair in Albuquerque,New Mexico can be employed for the remedial measures. It is easier to treat a defect well before serious damage has been done. So regular screening should be conducted on buildings and even the minor signs should not be overlooked so as to avoid any further damage and possible mishaps.